The Prusa USS Drybox is a sealed filament box made from hydrophobic materials and designed for 3D printing, not adapted from a food container. Put the spool in, close the lid and print straight from the box until the spool is empty.
Why it matters
Wet filament causes steam bubbles, stringing, oozing and rough walls. Prusa rates the USS Drybox about five times more airtight than generic dryboxes. With 50 g of silica gel it holds around 10% relative humidity for weeks, and it lets in 95% less moisture than open air.
Features
-
Quick access port: load filament without opening the lid. The sealed port takes a PTFE tube for a direct run to the printer.
-
Mounts on the Prusa spool holder: the centre opening fits the bayonet spool holder on the CORE One+ and CORE One L series.
-
Stackable: flat sides let boxes stack, one spool per box.
-
Built-in hygrometer and thermometer (°C or °F).
-
Side access covers: turn the spool or swap the silica gel without opening the whole box.
-
Label holder with tear-off labels. You can also print your own tags from Printables.
Compatibility
- Standard spools from most brands up to 1 kg, plus smaller specialty rolls.
- Fits the CORE One+ and CORE One L/L+ bayonet spool holder natively. Printable adapters are available for the CORE One, XL, MK4/S and HT90.
- Works with the Prusa OpenPrintTag upgrade.
- Use a community spool holder to fit other printers.
Australian stock, ready to go from our Townsville workshop.