PDB
- Input voltage range: 6~60V (2~12S LiPo)
- PDB/current sense resistor: 140A cont, 264A burst.
- ESC power pads: 60A cont. 100A burst
- 6x ESC power /signal/ telemetry pads
- Current Senor: 264A, 3.3V ADC
- Current Scale 125(INAV/BF), BATT_AMP_PERVLT 80 (ArduPilot)
JST-SH-8P Connector and Pads
- Vbat: Battery voltage
- G: ground
- Curr: current signal
- Tlm: Duplicates Tlm pads for ESC telemetry
- S1/S2/S3/S4/S5/S6: ESC signal
- Vx: Regulator output
BEC Vx output (5V default)
- Vx= 5V by default, Continuous 5 Amps
- Bridge 9V jumper, Vx= 9V, Continuous 4 Amps, Max.5A
- Bridge 12V jumper, Vx= 12V, Continuous 4 Amps, Max.5A
- Output Short-circuit tolerant (1 seconds)
- Overcurrent protection & self-recovery
Voltage divider
- 1K:20K resistors
- Output 1/21 Vbat voltage
Physical
- Mounting: 30.5 x 30.5mm, 20 x 20mm, Φ3mm
- Dimensions: 49 x 40 x 6 mm
- Weight: 12g
Including
- 1x PDB-HEX
- 1x Rubycon ZLJ 63V 390uF
- 1x JST-SH1.0_8pin cable, 5cm
- 2x JST-SH1.0_8pin connectors
QUICK START GUIDE (PDF 13M)
Why order from Rising Sun FPV?
• FREE Express* shipping over $250.
• Orders ship out of Townsville, QLD, Australia at 1530.
• Active on Instagram - Tag us or DM us!
• Watch what we are up to on our YouTube Channel!
• Join our Facebook Page for updates and RSFPV news.
• GST Registered.
• Gifts with every order!
• Veteran Owned and Operated
• Defence and Service discounts - Apply Here
• 3D Printing and Custom design – Inquire Here.
• Visit us at our Store and have a yarn.
• Sponsor of Townsville FPVR, Next Level FPV
and the Australian Army Drone Racing Team.
• FPV Drone service, support and repairs.
• Earn points for every $1 spent.
• Buy now and pay later with Zippay, Afterpay, Humm and Laybuy.