HobbyWing XRotor Micro Flight Controller F4 G3

  • Sale

  • Regular price $64.99

Tax included. Shipping calculated at checkout.
Found a better price?
Order in 0H, 44M, 42 Seconds (before 3pm AEST) for same day despatch.


  • Redesign every aspect
  • STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency.
  • Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipments.
  • The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted.
  • Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
  • The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
  • F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily.
  • Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
  • LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
  • Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed).
  • Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
  • Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.
  • Switch module of board load graphic transmission(VTX) can use remote contorl to
  • control switch of graphic transmission.


  • Model¬†-¬†Micro F4 Flight Controller F4 G3 + OSD
  • SKU - 31003001
  • Application¬†-¬†FPVs with 130-300mm FPVs Diagonal Wheelbase
  • Firmware¬†-¬†OMNIBUSF4SD
  • FC Programming¬†-¬†supported
  • Programming - via Betaflight/Cleanflight-configurator and Others
  • Compatible with (Modes)¬†-¬†PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc
  • Compatible with (Transmitters) - PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc.
  • OSD - Buit-in
  • Voltage Monitoring¬†-¬†Supported
  • Current Monitoring¬†-¬†Supported
  • External Buzzer¬†-¬†Supported
  • LED Control¬†-¬†Supported
  • USB Port - MicroUSB
  • Timing - Supported
  • Motor Rotation - Supported
  • size/ weight - 36*36mm / 6g

Why order from Rising Sun FPV?

‚ÄĘ FREE Express* shipping over $250.

‚ÄĘ Orders ship out of Townsville, QLD, Australia at 1530.

‚ÄĘ Active on Instagram - Tag us or DM us!

‚ÄĘ Watch what we are up to on our YouTube Channel!

‚ÄĘ Join our Facebook Page for updates and RSFPV news.

‚ÄĘ GST Registered.

‚ÄĘ Gifts with every order!

‚ÄĘ Veteran Owned and Operated

‚ÄĘ Defence and Service discounts - Apply Here

‚ÄĘ 3D Printing and Custom design ‚Äď Inquire Here.

‚ÄĘ Visit us at our Store and have a yarn.

‚ÄĘ Sponsor of Townsville FPVR, Next Level FPV

and the Australian Army Drone Racing Team.

‚ÄĘ FPV Drone service, support and repairs.

‚ÄĘ Earn points for every $1 spent.

‚ÄĘ Buy now and pay later with Zippay, Afterpay, Humm and Laybuy.