{"title":"CubePilot Autopilots \u0026 Carrier Boards","description":"\u003cp\u003eCubePilot Cube autopilots and carrier boards: CubeOrange+, CubeOrange FD, CubePurple and CubeBlack flight controllers, complete Standard and Mini Sets, plus ADS-B, Kore, EDU450, CubeRed and Mini carrier boards. Runs ArduPilot and PX4.\u003c\/p\u003e","products":[{"product_id":"cubepilot-cubeorange-plus-standard-set-ads-b","title":"CubePilot CubeOrange+ Standard Set (ADS-B Carrier Board)","description":"\u003cp\u003eThe CubeOrange+ Standard Set is CubePilot's complete autopilot kit: the CubeOrange+ flight controller plugged into the full-size ADS-B Carrier Board, with the Power Brick Mini and every cable you need to wire up a multirotor, plane, VTOL, rover or boat on ArduPilot or PX4.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCubeOrange+ autopilot: STM32H757 (H7) processor, triple-redundant IMUs, two of them vibration-isolated and temperature-controlled\u003c\/li\u003e\n\u003cli\u003eADS-B Carrier Board with a built-in 1090MHz ADS-B receiver (uAvionix) so you can see nearby crewed aircraft\u003c\/li\u003e\n\u003cli\u003eFull carrier board breaks out every Cube function through the 80-pin DF17 connector\u003c\/li\u003e\n\u003cli\u003ePower Brick Mini for regulated autopilot power and battery voltage\/current sensing\u003c\/li\u003e\n\u003cli\u003eCNC aluminium Cube housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x CubeOrange+ autopilot\u003c\/li\u003e\n\u003cli\u003e1 x ADS-B Carrier Board\u003c\/li\u003e\n\u003cli\u003e1 x Power Brick Mini and cable\u003c\/li\u003e\n\u003cli\u003e1 x I2C board and 2 x I2C cables\u003c\/li\u003e\n\u003cli\u003e2 x CAN cables, 1 x GPS1 cable, 1 x buzzer cable\u003c\/li\u003e\n\u003cli\u003e1 x micro-USB cable\u003c\/li\u003e\n\u003cli\u003e4 x mounting screws and 3M mounting stickers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower input: 4.1 to 5.7 V, 2.5 A\u003c\/li\u003e\n\u003cli\u003eUSB input: 4 to 5.7 V, 250 mA\u003c\/li\u003e\n\u003cli\u003eServo rail: 3.3 V \/ 5 V\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -10 to 55 °C\u003c\/li\u003e\n\u003cli\u003eNot waterproof\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/docs.cubepilot.org\/autopilot\/the-cube\" target=\"_blank\"\u003eCubePilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/cd8b1d20-2869-438a-9135-df5a085afe07_17a83d15-49a7-4c3a-82e7-f2f59f49505e.jpg?v=1791961598\" alt=\"CubePilot CubeOrange+ Standard Set overview\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985723691233,"sku":"HX4-06222","price":729.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/673c34e2-f4bd-4db1-b67f-c81a188bf4f5.png?v=1791961510"},{"product_id":"cubepilot-cubeorange-plus-autopilot","title":"CubePilot CubeOrange+ Autopilot","description":"\u003cp\u003eThe CubeOrange+ is CubePilot's current flagship Cube autopilot and the model CubePilot recommends for new designs. It runs ArduPilot or PX4 and plugs into any CubePilot carrier board through the standard 80-pin DF17 connector.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast STM32H757 (H7) processor with 1MB RAM\u003c\/li\u003e\n\u003cli\u003eTriple-redundant IMU sensors\u003c\/li\u003e\n\u003cli\u003eTwo IMU sets mechanically vibration-isolated to reduce the effect of frame vibration on state estimation\u003c\/li\u003e\n\u003cli\u003eIMUs temperature-controlled by onboard heaters for consistent performance\u003c\/li\u003e\n\u003cli\u003eFlight management unit and IMUs housed in a compact CNC aluminium cube\u003c\/li\u003e\n\u003cli\u003eFully compatible with CubePilot carrier boards, or design your own carrier for a commercial system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower input: 4.1 to 5.7 V\u003c\/li\u003e\n\u003cli\u003eUSB input: 4 to 5.7 V, 250 mA\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -10 to 55 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e the Cube module needs a carrier board (sold separately), such as the ADS-B Carrier Board, Mini Carrier Board or Kore Carrier Board. For a ready-to-fly kit, see the CubeOrange+ Standard Set.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/docs.cubepilot.org\/autopilot\/the-cube\" target=\"_blank\"\u003eCubePilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985874882785,"sku":"HX4-06214","price":449.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/ab210fb7-93d4-49d9-9927-5bb9e1b2c461.png?v=1791961746"},{"product_id":"cubepilot-cubeorange-plus-standard-set-no-ads-b","title":"CubePilot CubeOrange+ Standard Set (No ADS-B)","description":"\u003cp\u003eA complete CubeOrange+ autopilot kit for builds that don't need ADS-B traffic awareness. The CubeOrange+ flight controller comes with a full-size carrier board that has no ADS-B receiver, plus power and cabling so you can wire up a multirotor, plane, VTOL, rover or boat on ArduPilot or PX4.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCubeOrange+ autopilot: STM32H757 (H7) processor, triple-redundant IMUs, two vibration-isolated and temperature-controlled\u003c\/li\u003e\n\u003cli\u003eFull carrier board breaks out every Cube function through the 80-pin DF17 connector\u003c\/li\u003e\n\u003cli\u003eCarrier board in this set does not include the ADS-B receiver\u003c\/li\u003e\n\u003cli\u003eSupplied with power module and cable set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWant ADS-B? See the CubeOrange+ Standard Set (ADS-B Carrier Board).\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/docs.cubepilot.org\/autopilot\/the-cube\" target=\"_blank\"\u003eCubePilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985874948321,"sku":"HX4-06247","price":895.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/84c7a318-c55d-4f3a-95c1-444354d6d739.jpg?v=1791961747"},{"product_id":"cubepilot-cubeorange-plus-standard-set-sma","title":"CubePilot CubeOrange+ Standard Set with SMA Connector","description":"\u003cp\u003eA version of the CubeOrange+ Standard Set fitted with an SMA antenna connector. You get the CubeOrange+ autopilot on a full-size carrier board, with power and cabling to build a multirotor, plane, VTOL, rover or boat on ArduPilot or PX4.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCubeOrange+ autopilot: STM32H757 (H7) processor, triple-redundant IMUs, two vibration-isolated and temperature-controlled\u003c\/li\u003e\n\u003cli\u003eFull carrier board breaks out every Cube function through the 80-pin DF17 connector\u003c\/li\u003e\n\u003cli\u003eSMA connector for an external antenna\u003c\/li\u003e\n\u003cli\u003eSupplied with power module and cable set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e CubePilot quotes 10 to 15 weeks for this set. Contact us for an ETA before ordering.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/docs.cubepilot.org\/autopilot\/the-cube\" target=\"_blank\"\u003eCubePilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985876881633,"sku":"CP-06344","price":895.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/7ea05045-7a9b-444f-87f4-d82ffd06f4d8.jpg?v=1791961748"},{"product_id":"cubepilot-cubeorange-plus-mini-set","title":"CubePilot CubeOrange+ Mini Set","description":"\u003cp\u003eThe CubeOrange+ Mini Set pairs the CubeOrange+ autopilot with CubePilot's compact Mini Carrier Board, for airframes where the full-size carrier board won't fit. Runs ArduPilot or PX4.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCubeOrange+ autopilot: STM32H757 (H7) processor, triple-redundant IMUs, two vibration-isolated and temperature-controlled\u003c\/li\u003e\n\u003cli\u003eMini Carrier Board with dual power inputs (automatic switchover if one fails)\u003c\/li\u003e\n\u003cli\u003ePer-port power distribution limits current at each connector\u003c\/li\u003e\n\u003cli\u003eOver- and under-voltage protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e CubePilot advises the lead time on the Mini Set is long. Contact us for an ETA before ordering.\u003c\/p\u003e\u003cp\u003eGenuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/177ba567-ad21-498a-9694-876dc4a2ac92.jpg?v=1791961598\" alt=\"CubePilot CubeOrange+ Mini Set overview\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985876979937,"sku":"HX4-06229","price":678.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/e267d249-2c2d-47bb-acb6-50c02b9cbfff.png?v=1791961749"},{"product_id":"cubepilot-cubeorange-fd-autopilot","title":"CubePilot CubeOrange FD Autopilot","description":"\u003cp\u003eThe CubeOrange FD is a Cube autopilot module with an H7 processor and triple-redundant IMUs, compatible with all CubePilot carrier boards. It runs ArduPilot or PX4.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast H7 processor with 1MB RAM\u003c\/li\u003e\n\u003cli\u003eTriple-redundant IMU sensors\u003c\/li\u003e\n\u003cli\u003eTwo IMU sets mechanically vibration-isolated\u003c\/li\u003e\n\u003cli\u003eIMUs temperature-controlled by onboard heaters\u003c\/li\u003e\n\u003cli\u003eCompact cube housing with the standard 80-pin DF17 carrier connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e CubePilot does not recommend the Orange FD for new designs. For new builds we suggest the CubeOrange+. The Cube needs a carrier board (sold separately).\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/docs.cubepilot.org\/autopilot\/the-cube\" target=\"_blank\"\u003eCubePilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985877045473,"sku":"HX4-06160","price":1615.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/2b61e8f3-d067-4c1c-9b7d-9d86ed7a4302.png?v=1791961750"},{"product_id":"cubepilot-cubeorange-fd-standard-set-ads-b","title":"CubePilot CubeOrange FD Standard Set (ADS-B Carrier Board)","description":"\u003cp\u003eThe CubeOrange FD autopilot supplied as a Standard Set on CubePilot's ADS-B Carrier Board, with power and cabling to build a complete ArduPilot or PX4 system.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCubeOrange FD autopilot: H7 processor with 1MB RAM, triple-redundant IMUs, two vibration-isolated and temperature-controlled\u003c\/li\u003e\n\u003cli\u003eADS-B Carrier Board with built-in ADS-B receiver for crewed-aircraft traffic awareness\u003c\/li\u003e\n\u003cli\u003eFull carrier board breaks out every Cube function through the 80-pin DF17 connector\u003c\/li\u003e\n\u003cli\u003eSupplied with power module and cable set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e CubePilot does not recommend the Orange FD for new designs. For new builds we suggest the CubeOrange+ Standard Set.\u003c\/p\u003e\u003cp\u003eGenuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985943236833,"sku":"HX4-06159","price":2183.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/233e59c4-f546-4e50-a6ec-5940a279c964.png?v=1791961831"},{"product_id":"cubepilot-cubeblack-autopilot-final-batch","title":"CubePilot CubeBlack Autopilot (Final Batch)","description":"\u003cp\u003eThe CubeBlack is the original Cube autopilot (formerly sold as the Pixhawk 2.1 Cube). This is CubePilot's final production batch, ideal for keeping existing CubeBlack fleets and type-certified designs flying with a like-for-like replacement.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTriple-redundant IMU sensors, two sets vibration-isolated and temperature-controlled\u003c\/li\u003e\n\u003cli\u003eStandard 80-pin DF17 connector, compatible with CubePilot carrier boards\u003c\/li\u003e\n\u003cli\u003eRuns ArduPilot or PX4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this is the final batch of CubeBlack. For new builds we recommend the CubeOrange+. The Cube needs a carrier board (sold separately).\u003c\/p\u003e\u003cp\u003eGenuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985943335137,"sku":"HX4-06005","price":2063.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/273437d1-5bc6-45c9-a30a-b79165e66cec.jpg?v=1791961832"},{"product_id":"cubepilot-cubepurple-autopilot","title":"CubePilot CubePurple Autopilot","description":"\u003cp\u003eThe CubePurple is a Cube autopilot designed for ground-based vehicles such as boats, cars and rovers. Based on the CubeBlack main module, it is a smaller platform for applications where sensor redundancy isn't required.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle IMU and single barometer\u003c\/li\u003e\n\u003cli\u003eFlight management unit and IMU housed in a compact cube\u003c\/li\u003e\n\u003cli\u003eAll inputs and outputs through the standard 80-pin DF17 connector, compatible with every CubePilot carrier board\u003c\/li\u003e\n\u003cli\u003eBuild your own carrier board using CubePilot's published specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/ardupilot.org\/copter\/docs\/common-thecubepurple-overview.html\" target=\"_blank\"\u003eArduPilot CubePurple overview\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985943433441,"sku":"HX4-06059","price":873.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/1495aba5-0a55-4c10-826b-e0bbe0b3a65a.jpg?v=1791961833"},{"product_id":"cubepilot-ads-b-carrier-board","title":"CubePilot ADS-B Carrier Board","description":"\u003cp\u003eCubePilot's full-size carrier board with a built-in ADS-B receiver. It breaks out the full functionality of the Cube and lets your autopilot see nearby crewed aircraft broadcasting ADS-B.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in 1090MHz ADS-B receiver\u003c\/li\u003e\n\u003cli\u003e\"Full\" carrier board: every Cube function broken out to standard JST-GH connectors\u003c\/li\u003e\n\u003cli\u003eAccepts any Cube autopilot via the 80-pin DF17 connector\u003c\/li\u003e\n\u003cli\u003eMade in Taiwan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCube autopilot not included. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985943498977,"sku":"HX4-06105","price":325.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/4337e46d-fb7c-4768-b39e-e1f854b88659.jpg?v=1791961835"},{"product_id":"cubepilot-mini-carrier-board","title":"CubePilot Mini Carrier Board","description":"\u003cp\u003eThe Mini Carrier Board has the standard DF17 connector, so it works with every version of the Cube autopilot. It offers almost the same capability as the full-size standard carrier board in a much smaller footprint, for airframes with tight space limits.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual power inputs for redundancy, with automatic switchover if one fails\u003c\/li\u003e\n\u003cli\u003ePower distribution that limits current at each connector, so one device can't overload the rest\u003c\/li\u003e\n\u003cli\u003eOver- and under-voltage protection that shuts the circuit down outside safe limits\u003c\/li\u003e\n\u003cli\u003eMade in Taiwan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCube autopilot not included. More information: \u003ca href=\"https:\/\/ardupilot.org\/copter\/docs\/common-thecubepurple-overview.html#carrier-board-mini\" target=\"_blank\"\u003eArduPilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985943597281,"sku":"HX4-06041","price":183.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/deb733a9-8918-4c6c-9ee5-04cdcadfb14e.jpg?v=1791961836"},{"product_id":"cubepilot-kore-carrier-board","title":"CubePilot Kore Carrier Board","description":"\u003cp\u003eThe Kore Carrier Board combines a Cube carrier board with heavy-duty power distribution, so a single board can run the autopilot, ESCs, lights and payloads on larger multirotors.\u003c\/p\u003e\u003ch3\u003eFeatures at a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 12-cell lithium battery (50.4V)\u003c\/li\u003e\n\u003cli\u003e140A continuous current with 280A surges\u003c\/li\u003e\n\u003cli\u003ePower and signal for ESCs conveniently located in the corners\u003c\/li\u003e\n\u003cli\u003e12V navigation light power at each corner\u003c\/li\u003e\n\u003cli\u003eBuilt-in power distribution with voltage and current sensing\u003c\/li\u003e\n\u003cli\u003eRedundant power supplies for flight-critical components\u003c\/li\u003e\n\u003cli\u003ePayload connectors with resettable fuses for 5V, 12V and direct battery power\u003c\/li\u003e\n\u003cli\u003eGood-power and error indicator lights, built-in buzzer with volume control\u003c\/li\u003e\n\u003cli\u003eConnectors for every function of the Cube, plus FMU and IO debug ports\u003c\/li\u003e\n\u003cli\u003eEasily accessible PWM voltage level selector (3.3V or 5V), resistant to ground bounce\u003c\/li\u003e\n\u003cli\u003eConnector-compatible with the standard ProfiCNC carrier board\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCables\u003c\/h3\u003e\u003cp\u003eStandard: 4-pin and 6-pin JST-GH. Payload power: 4-pin (5V), 5-pin (12V) and 6-pin (battery) Clik-Mate 1.25mm.\u003c\/p\u003e\u003cp\u003eCube autopilot not included. Made in Taiwan. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985993928929,"sku":"HX4-06038","price":598.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/fe37a1ab-c492-469c-a0c0-f8db1fb38457.jpg?v=1791961907"},{"product_id":"cubepilot-cubered-carrier-board","title":"CubePilot CubeRed Carrier Board","description":"\u003cp\u003eThe \"full\" carrier board for the CubeRed Pro autopilot. It breaks out the full functionality of the CubeRed and includes a built-in ADS-B receiver.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in ADS-B receiver\u003c\/li\u003e\n\u003cli\u003eBreaks out the full functionality of the CubeRed Pro\u003c\/li\u003e\n\u003cli\u003eMade in Taiwan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCubeRed autopilot not included. Pinout and latest information: \u003ca href=\"https:\/\/docs.cubepilot.org\/user-guides\" target=\"_blank\"\u003eCubePilot docs\u003c\/a\u003e. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985995829473,"sku":"CP-06321","price":393.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/932b2e02-3831-40a3-9d0d-3cc5413709cd.jpg?v=1791961908"},{"product_id":"cubepilot-edu450-carrier-board","title":"CubePilot EDU450 Carrier Board","description":"\u003cp\u003eThe EDU450 Carrier Board is built to mount directly on the EDU-450 airframe. It combines a power supply module, power distribution board and ADS-B carrier board in one unit, aimed at professional builds including swarming and drone-show fleets.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntegrated power supply, power distribution and Cube carrier board\u003c\/li\u003e\n\u003cli\u003eUpgraded ADS-B interface that accepts an external antenna for longer reception range\u003c\/li\u003e\n\u003cli\u003eDedicated HerePro interface for data, debugging and power\u003c\/li\u003e\n\u003cli\u003eRS485 and SPI interfaces\u003c\/li\u003e\n\u003cli\u003eSupports a Here GNSS module and the Herelink Air Unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCube autopilot not included. Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/fb003d79-9e5f-4d26-b43c-8b861c6bc554.jpg?v=1791961598\" alt=\"CubePilot EDU450 Carrier Board overview\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":50985995927777,"sku":"HX4-06280","price":509.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/c99a5ecf-1c56-4afb-abed-d6205db3ebe1.jpg?v=1791961909"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/collections\/ab210fb7-93d4-49d9-9927-5bb9e1b2c461.png?v=1791962799","url":"https:\/\/risingsunfpv.com.au\/collections\/cubepilot-autopilots-carrier-boards.oembed","provider":"Rising Sun FPV","version":"1.0","type":"link"}