The ZEEZ F7 V2-Lite 2020 is an 8 Motor Output, DJI HD System Ready Flight Controller with an on-board 9V@3A regulator to power the DJI Air Unit and a 5V@3A regulator to power all the peripheral. It has almost the same specs and features of its big brother, the 3030 version, but without a barometer and in a more compact format.
It uses a powerful F7 processor along with top-of-the-line hardware with a MPU6000 Gyro. ZEEZ F7 V2-Lite 2020 comes in a standard 20×20 form factor. It comes with spaces and pads for TBS Crossfire and TBS Unify Nano32 for a very clean and low-profile assembly. It has 4 onboard RGB LED’s and easy to solder LED pads on each corner. There are 5 UARTS available as well as, I2C port, 16MB Flash memory for Blackbox data record, an OSD chip for analog video and LC Filter to power the Analog camera and VTX
We took all the feedback given to us from the previous version and have improved the overall stability and power supply cleaning. We were able to reduce the size of the FC, thanks to its 6 layers design. Along with easier to solder pads and improved the strength of all the solder pads, adding additional copper around the pads.
• Mounting holes: 20x20mm
• LiPo Power input: 3S-6S
• BEC 5V-3A / 9V-3A
• STM32F722 MCU (216MHz max frequency)
• MPU6000 Gyro/ACC for smooth performance
• OSD chip Onboard
• 5 x UARTs
• 1 x I2C bus
• 16MB Onboard flash
• LC Filter for 5V VTX and CAM
• HD Plug for DJI AirUnit or CaddxVista
• USB Type C connector
• Onboard RGB LED distribution for clean wiring to the
LED on the arm of the quad.
• Onboard 4 WS2812B RBG LED
• 8 Motor output
• Direct solder connection and board space for TBS
Nano RX and TBS Unify Pro32 Nano providing the
ultimate in clean stack installation.
• Logic Side and USB current protection
(1X) Zeez F7 V2 2020 Flight Controller •
(4X) Aluminum Standoff
(4X) Aluminum Nut
(1X) ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector
(1X) ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp)
JST SH 1.00mm connector
(1X) JST SH 8 Pin Plastic Housing
(1X) JST SH 10 Pin Plastic Housing
(2X) 2.00mm Header Pin for VTX connection
(2X) 2.54mm Header Pin for Receiver connection
(1X) JST 6 pin to AirUnit Connector
Why order from Rising Sun FPV?• FREE Express* shipping over $250.
• Orders ship out of Townsville, QLD, Australia at 1530.
• Active on Instagram - Tag us or DM us!
• Watch what we are up to on our YouTube Channel!
• Join our Facebook Page for updates and RSFPV news.
• GST Registered.
• Gifts with every order!
• Veteran Owned and Operated
• Defence and Service discounts - Apply Here
• 3D Printing and Custom design – Inquire Here.
• Visit us at our Store and have a yarn.
• FPV Drone service, support and repairs.
• Earn points for every $1 spent.